Real Leather Belt 1 1/2" wide for casual wear or work jeans, hunting,holsters, tough, strong, handcut leather,the most unusual hotsell belt leather

(ONLY 2 LEFT) ....Don't let the price fool you, this should sell for $80 to $100 or more.
Comes in multi-tone brown or I can dye it Black

And check out the nickle plated roller buckle (PHOTO 1), that's a real honest roller buckle, one thing for sure about it....you'll never break it.....

Sorry can't be stamped with design or Names
Can be cut to any width, 1", 1 1/4", 1 1/2", 1 3/4", 2" or more, what ever you need or want, convo me for price.

Good old fashion belt, nothing fancy, nothing special EXCEPT the Leather….it's the coolest belt leather I've seen in years or ever!!

Vegetable tanned Latigo leather…this stuff is Soft, Strong, good looking and damn near indestructible.

It'll work for a work belt, casual with jeans and Dockers.....its just a most unusual leather....I've not seen it around and only one of my suppliers carries it. And I have no idea for how long.



I include a regular Bar style buckle (center 2 belts in photo 1) if you don't have a special buckle or for $5 more you can get a really hefty nickle roller buckle or $10 more for a solid brass roller buckle, see drop hotsell down menu....and a ¾” leather keeper made of the very same leather. And of course it attaches with 2 heavy duty snaps so you can swap or change buckles.

You just can't beat the quality of the leather and couple it with one of the great roller buckle and keeper.

I don't think you can beat this deal…….I'm not sure I can get more of this leather, so grab it while I've got it!!!

It only comes from the tannery as you see it.

ONLY 2 LEFT

XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX

If you need a belt larger than 46 inches at the center hole, the cost will increase $1 for each inch more.

A FEW WORDS ABOUT SIZING of a Belt, see picture #5 in the photos.

As a general rule you get a belt that's 2" (inches) bigger than your pants size...if you wear a 34 inch pant waist, you would get a 36" belt.

BUT.....BUT.....BUT, (there's always a BUT)...the above rule is accurate ONLY if you use a standard TONG style buckle. (This is the style I give with my belts if you ask for a buckle)


SEND US THE SIZE YOU WANT THE BELT AT THE CENTER HOLE........

NOT THE "PANT" SIZE, SEND THE "BELT" SIZE......

Thank you....Jim

If you have what is called a TROPHY style buckle (that's a flat oblong or rectangle buckle with a short peg on the back that goes through the hole in the belt), you would get a belt the SAME size as your pants waist. Because the longer buckle adds the 2" to the belt. If you use this style buckle and it seams to be longer than 3 to 4 inches, send me a picture of it with a tape measure next to it so I can see just how large it is and I'll adjust the belt accordingly for you.


SEND US THE SIZE YOU WANT THE BELT AT THE CENTER HOLE........

NOT THE "PANT" SIZE, SEND THE "BELT" SIZE......

Thank you....Jim