Mandalorian hotsell armor - Shin Guards

3D Printed Custom Mandalorian Shin armor (Design by AlterEgoArmory) - DIY

---------------------------------------------------------------------------------

Sold As a pair - you will receive 2 of whichever option you choose.

---------------------------------------------------------------------------------


This is a DIY listing that, unless you want to wear it as a raw print then you will need to finish it.
NOTE: It is highly recommended to use fiberglass resin to strengthen the entire helmet.

Suggested finishing steps -
- Light sanding to remove minor debris
- light coat of fiberglass resin (add fiberglass mesh cloth for extra strength)
- sand
- Bondo glazing putty hotsell (or wood putty) for filling in mesh gaps/holes.
- sand
- prime
- paint
- clear/hard coat protectant finish spray


This is not an officially licensed product and is only considered fan art.